Soon after posting yesterday’s blog entry, How To: VPN Between RV082 (or RV042) and WRT54GL (or WRT54G), I received a comment from Paul Wouters:
Use dpdaction=restart
btw yout ike/ipsec lifetimes are insanely short. you should not do that. leave them default, and the shortest one of the other device will be used.
Paul, if you’re reading this, thanks for the tips!
I wasn’t sure how I could have missed that useful dpdaction=restart setting so I went back and checked the ipsec.conf man page this morning. Sure enough, the dpdaction=restart setting was missing from the man page. That’s why I missed it! See! I did RTFM!
Anyway, I did some googling to find out more about dpdaction=restart and I came across this Openswan mailing list message, authored by none other than Paul Wouters: …Continue reading » A Virtual Visit from Paul Wouters
Introduction
Using the OpenWrt Linux distribution, you can configure a LinkSys WRT54G (also WRT54GS and WRT54GL) router as an IPSec VPN endpoint. This IPSec VPN functionality is provided by an Openswan package that was built specifically for OpenWrt.
In this How To, I will show you how to create a VPN between a LinkSys WRT54GL and a LinkSys RV082 (RV042 could be used also). …Continue reading » How To: VPN Between RV082 (or RV042) and WRT54GL (or WRT54G)
Just for laughs, I recently created a point-to-point VPN (a.k.a. gateway-to-gateway VPN) between my home and the office. At the office, the VPN endpoint is a LinkSys RV042, which, as far as I can tell, runs Freeswan VPN software. At home, the VPN endpoint is a LinkSys WRT54GL, which I hacked to run the OpenWrt linux distribution and OpenSwan VPN software. A future post will detail exactly how I did this but the purpose of this post is to discuss how I got my Windows file shares to work across the VPN. …Continue reading » Accessing Windows Shares Across a VPN
